PUBLICATIONS

S. J. S. Morris

Refereed Publications

Archival Journals

  1. S.J.S. Morris, A new continuum model of the incoherent interface compared with growth of a spinel rim on an olivine grain. Phys. Earth Planet. Inter., 292 29--41, 2019.
  2. S.J.S. Morris, Interface kinetics, grain--scale deformation, and polymorphism. Annu. Rev. Earth Planet. Sci. , 45, doi.org/10.1146/annurev-earth-040610- 133511, 2017.
  3. U. Ceyhan & S.J.S. Morris, Meniscus growth during the wiping stage of intaglio (gravure) printing. J. Fluid Mech., 807, 419--440, doi:10.1017/jfm.2016.618, 2016.
  4. J.--P. Njante & S.J.S. Morris, Diffusion--controlled evaporating perfectly wetting meniscus in a channel. Chem. Eng. Comm., 201, 1125--1147, doi:10.1080/00986445.2013.793677, 2014.
  5. S.J.S. Morris, Kinematics and thermodynamics of a growing rim of high-pressure phase. Phys. Earth Planet. Inter., 228, 127--143doi:10.1016/j.pepi.2014.01.003, 2014.
  6. S.J.S. Morris, On the contact region of a diffusion-limited evaporating drop: a local analysis. J. Fluid Mech. 739, 308-337, doi: 10.1017/jfm.2013.577, 2014.
  7. D. Soltman, B. Smith, S.J.S. Morris & V. Subramanian, Inkjet printing of precisely defined features using contact-angle hysteresis. J. Colloid Interf. Sci. http://dx.doi.org/10.1016/j.jcis.2013.03.006, 2013.
  8. R. Kitsomboonloha, S.J.S. Morris, X. Rong & V. Subramanian, Femtoliter-scale patterning by high-speed, highly scaled inverse gravure printing. Langmuir , 28, 16711−16723, doi: 10.1021/la3037132, 2012
  9. L. C. Lee, S.J.S. Morris & J. Wilkening, Stress concentrations, diffusionally accommodated grain boundary sliding and the viscoelasticity of polycrystals. Proc. R. Soc. A, 467, 1624-1644, doi: 10.1098/rspa.2010.0447, 2011.
  10. D. Soltman, B. Smith, H. Kang, S.J.S. Morris & V. Subramanian, Methodology for inkjet printing of partially wetting films. Langmuir,, 26 15686-–15693, doi: 10.1021/la102053j, 2010.
  11. L. C. Lee & S.J.S. Morris, Anelasticity and grain boundary sliding. Proc. R. Soc., A, 466, 2651–2671, doi:10.1098/rspa.2009.0624, 2010.
  12. F. Renard, D. K. Dysthe, J. G. Feder, P. Meakin, S.J.S. Morris & B. Jamtveit, Pattern formation during healing of fluid-filled cracks: an analog experiment. Geofluids, 9, 365–372, doi: 10.1111/j.1468-8123.2009.00260.x, 2009.
  13. S.J.S. Morris & Ian Jackson, Implications of the similarity principle relating creep and attenuation in finely--grained solids, Mat. Sci. Eng., A-Struct., 521-522, 124-127, doi:10.1016/j.msea.2008.09.157, 2009.
  14. S.J.S. Morris & Ian Jackson, Diffusionally--assisted grain boundary sliding and viscoelasticity of polycrystals, J. Mech. Phys. Solids, 57, 744–761, doi:10.1016/j.jmps.2008.12.006, 2009.
  15. S.J.S. Morris, Viscosity stratification and the energetics of end-driven isothermal cellular flow, Phys. Fluids, 20, 6, 06310, 2008.
  16. S.J.S. Morris, Dynamic significance of long-wave density gradients due to heat generation within the mantle, Geophys. Res. Lett., 34, L15307, doi:10.1029/2007GL030059, 2007.
  17. Ian Jackson, Ulrich Faul, John FitzGerald & S.J.S. Morris, Contrasting viscoelastic behaviours of melt-free and melt-bearing olivine, Mat. Sci. Eng., A-Struct., 442, 170-174, 2006.
  18. O. Englander, D. Christensen, J. Kim, L.W. Lin & S.J.S. Morris, Electric field assisted growth and self-assembly of intrinsic silicon nanowires. Nano letters, 5,4, 705-708, 2005.
  19. S.J.S. Morris, Heat flow near the triple junction of an evaporating meniscus and a substrate. Proc. R. Soc., A, 460, 2487-2503, 2004.
  20. S.J.S. Morris & P.A. Davidson, Hydromagnetic edge waves and instability in reduction cells. J. Fluid Mech., 493, 121-130, 2003.
  21. S.J.S. Morris, The evaporating meniscus in a channel. J. Fluid Mech., 494, 297-317, 2003.
  22. V. Ajaev, G.M. Homsy & S.J.S. Morris, Dynamic response of geometrically constrained vapor bubbles, J. Colloid Interf. Sci., 254, 346-354, 2002.
  23. S.J.S. Morris, Sound speed without entropy, Am. J. Phys., 70, 495-497, 2002.
  24. S.J.S. Morris, The interaction of kinetics with transformation-induced viscoelastic strain during the olivine-spinel transformation, J. Mech. Phys. Solids, 50, 1363-1395, 2002.
  25. M. Manga, D. Weeraratne & S.J.S. Morris, Boundary layer thickness and instabilities in Benard convection of a liquid with temperature-dependent viscosity, Phys. Fluids, 13, 802-805, 2001.
  26. S.J.S. Morris, Contact angles for evaporating liquids predicted and compared with existing experiments, J. Fluid Mech., 432, 1-30, 2001.
  27. S.J.S. Morris, A phenomenological model for the contact region of an evaporating meniscus on a superheated slab, J. Fluid Mech., 411, 59-89, 2000.
  28. S.J.S. Morris, Stability of thermoviscous HeleShaw flow, J. Fluid Mech., 308,111-128, 1996.
  29. S. Morris, The relaxation of a decompressed inclusion, Z.A.M.P., 46, S335-S355. Special issue, 1995.
  30. Harris Wong, C. J. Radke & S. Morris, The motion of long bubbles in polygonal capillaries. Part 2. Drag, fluid pressure and fluid flow, J. Fluid Mech., 292, 95-110, 1995
  31. Harris Wong, C.J. Radke & S. Morris, The motion of long bubbles in polygonal capillaries. Part 1. Thin films, J. Fluid Mech., 292, 71-94,1995.
  32. D. Canright & S. Morris, Buoyant instability of a viscous film over a passive fluid, J.Fluid Mech., 255, 349-372, 1993.
  33. S. Morris, Stress relief during solid-state transformations in minerals, Proc. R. Soc., A, 436 , 203-216, 1992.
  34. H. Wong, C. J. Radke & S. Morris, Three-dimensional menisci in polygonal capillaries, J. Colloid and Interface Science, 148, 317-336, 1992.
  35. H. Wong, C. J. Radke & S. Morris, Two-dimensional menisci in non-axisymmetric capillaries, J .Colloid and Interface Science, 148, 284-287, 1992.
  36. R. Jeanloz & S. Morris, Is the geotherm sub-adiabatic in the lower mantle? Geophys. Res. Lett., 14, 335-338, 1987.
  37. R. Jeanloz & S. Morris, Temperature distribution in the earth's crust and mantle, Ann. Rev. Earth Planet. Sci., 14, 377-415, 1986.
  38. A. Ansari & S. Morris, The effects of strongly temperature-dependent viscosity on Stokes's drag law, J. Fluid Mech., 159, 459-476, 1985.
  39. S. Morris & D. R. Canright, A boundary-layer analysis of Benard convection with strongly temperature-dependent viscosity, Phys. Earth Planet. Inter., 36, 355-373, 1984.
  40. S. Morris, The effects of a strongly temperature--dependent viscosity on slow flow past a hot sphere, J. Fluid Mech., 124, 1-25, 1982.
  41. B. D. Marsh & S. Morris, Comment on 'Rise of deep diapirs' by D. Anderson, Geology, 9, 559-561, 1981.

Conference and Symposium Proceedings

  1. S.J.S.Morris & V.Moreno, Systematic analysis of an evaporating wetting meniscus on a smooth surface, Interfacial phenomena in thin films, HTD-vol 349, American Society of Mechanical Engineers, New York, 1997, pp 51--59.

    ME Home Page UCB Home Page College of Engineering Home Page

    © 1996 UC Regents