May 2001
Publications:
Lin, L. and A. P. Pisano, “Silicon Processed Microneedles,” Trans. IEEE, J. of MEMS, pp. 78-84, v. 8, n. 1, Mar 1999.
Singh, A., D. A. Horsley, M. B. Cohn, A. P. Pisano and R. T. Howe, “Batch Transfer of Microstructures Using Flip-Chip Solder Bonding, Trans. IEEE, J. of MEMS, pp. 27-33, v. 8, n. 1, Mar 1999.
Lin, L., R. T. Howe and A. P. Pisano, “Microelectromechanical Filters for Signal Processing,” Trans. IEEE, J. of MEMS, pp. 286-294, v. 7, n. 3, Sep 1998.
Lin, L.,
A. P. Pisano and V. P. Carey, "Thermal Bubble
Formations on Polysilicon Micro Resistors," Transactions ASME, J. of
Heat Transfer, pp. 735-742, v. 120, Aug 1998.
Horsley, D. A., M. B. Cohn, A. Singh, R. Horowitz and A. P. Pisano, "Design and Fabrication of an Angular Micro Actuator for Magnetic Disk Drives," Trans. IEEE, J. of MEMS, pp. 141-148, v. 7, n. 2, Jun 1998.
Horsley, D. A., R. Horowitz and A. P. Pisano, "Microfabricated Electrostatic Actuators for Hard Disk Drives," IEEE/ASME Trans. Mechatronics, pp. 175-183, v. 3, n. 3, Sep 1998.
Brosnihan, T. J., J. M. Bustillo, A. P. Pisano and R. T. Howe, “Embedded Interconnect and Electrical Isolation for High-Aspect-Ratio, SOI Inertial Sensors,” The 9th International Conference on Solid-State Sensors and Actuators – Transducers’97, pp. 637-640, Jun 1997.
DeVoe, D. L. and A. P. Pisano, “Modeling and Optimal Design of Piezoelectric Cantilever Microactuators,” Trans. ASME, J. of Micro Electromechanical Systems, pp. 266-270, v. 6, n. 3, Sep 1997.
DeVoe, D. L. and A. P. Pisano, “A Fully Surface Micromachined Piezoelectric Accelerometers,” 9th International Conference on Solid State Sensors and Actuators – Transducers’97), v. 2, pp. 1205-1208, Jun 1997.
Lin, L, A. P. Pisano and R. T. Howe, "A Micro Strain Gauge with Mechanical Amplifier," Trans. ASME, J. of Micro Electromechanical Systems, pp. 313-321, v. 6, n. 4, Dec 1997.
Roessig, T. A., Howe, R. T. and Pisano, A. P., “Surface-Micromachined Resonant Accelerometer,” 9th International Conference on Solid State Sensors and Actuators – Transducers’97, pp. 859-862, Chicago, 1997.
Singh, A., D. A. Horsley, M. B. Cohn, A. P. Pisano and R. T. Howe, “Batch Transfer of Microstructures Using Flip-Chip Solder Bump Bonding,” Transducers’97, Chicago, Jun 1997.
Daneman, M. J., N. C. Tien, O. Solgaard, A. P. Pisano, and R. S. Muller, “Linear Microvibromotor for Positioning Optical Components,” J. Micro Electromechanical Systems, pp. 159-165, v. 5, n. 3, Sep 1996.
Howe, R. T, B. E. Boser and A. P. Pisano, "Polysilicon Integrated Microsystems: Technologies and Applications," Sensors and Actuators A, v. 56, pp. 167-177, Elsevier Sequoia, 1996. (Invited Paper.)
Hsu, W.-S., and A. P. Pisano, "Modeling of a Hydraulic Lash Adjuster with Experimental Verification in Contact Forces," Trans. ASME, J. Mech. Des., v. 118, n 1, pp. 132-137, Mar 1996.
Cho, Y-H, A. P. Pisano and R. T. Howe, "Viscous Damping Model for Laterally Oscillating Microstructures," Trans. ASME, J. Micro Electromechanical Systems, pp. 81-87, v. 3, n. 2, Jun 1994.
Cho, Y.-H., B. M. Kwak, A. P. Pisano and R. T. Howe, "Slide Film Damping in Laterally Driven Microstructures," Sensors and Actuators A, v. 40, pp. 31-39, Elsevier Sequoia, 1994.
Lin, L. and A. P. Pisano, "Thermal Bubble Powered Microactuators," Microsystem Technologies, v. 1, n. 1, pp. 51-58, 1994.
Lin, L., K. S. Udell and A. P. Pisano, "Liquid-Vapor Phase Transition and Bubble Formation in Micro Structures," Thermal Science & Engineering, v. 2, n. 1, pp. 52-59, 1994.
Kim, C-J, R. S. Muller and A. P. Pisano, "Residual Strain Measurement of Thin Films using Microfabricated Vernier Gauges," Sensors and Materials, v. 4, n. 6, pp. 291-304, MYU Tokyo, 1994.
Lee, A. P. and A. P. Pisano, "Repetitive Impact Testing of Micromechanical Structures," Sensors and Actuators A, v. 39, pp. 73-82, Elsevier Sequoia, 1993.
Lin, Y, P. H. Hodges and A. P. Pisano, "Optimal Design of Resonance Suppression Helical Springs," Trans. ASME, J. Mech. Des, v. 115, n. 4, pp. 380-384, Sep 1993.
Sefler, J. F and A. P. Pisano, "The Design, Experimentation and Simulation of a Novel Coulomb Friction Device for Automotive Valve Spring Damping," Trans. ASME, J. Mech. Des, v. 115, n. 4, pp. 871-876, 1993.
Kim, C-J, A. P. Pisano and R. S. Muller, "Silicon-Processed Overhanging Microgripper," Trans. ASME, J. of Micro Electromechanical Systems, v. 1, n. 1, pp. 31-36, Mar 1992.
Kim, C.-J., A. P. Pisano, R. S. Muller and M. G. Lim, "Polysilicon Microgripper," Sensors and Actuators A, v. 33, pp. 221-227, Elsevier, 1992.
Lee, A. P. and A. P. Pisano, "Polysilicon Angular Micro Vibromotors," Trans. ASME, J. of Micro Electromechanical Systems, v. 1, n. 2, pp. 70-76, Jun 1992.
Hatch, C. T. and A. P. Pisano, "Modeling, Simulation and Modal Analysis of a Hydraulic Valve Lifter with Oil Compressibility Effects," Trans. ASME, J. Mech. Des, v. 113, n. 1, pp. 46-54, 1991.
Chan, C.-Y. and A. P. Pisano, "On the Synthesis of Cams with Irregular Followers," Trans. ASME, J. Mech. Des, v. 112, n. 2, pp. 36-41, 1990.
Lin, Y. and A. P. Pisano, "Three-Dimensional Dynamic Simulation of Helical Compression Springs," Trans. ASME, J. Mech. Des, v. 112, n. 4, pp. 529-537, 1990.
Pisano, A. P. and Y.-H. Cho, "Mechanical Design Issues in Laterally-Driven Microstructures," Sensors and Actuators, v. A, n. 23, pp. 1060-1064, 1990.
Udell, K. S., A. P. Pisano, R. T. Howe, R. M. White and R. S. Muller, "Microsensors for Heat Transfer and Fluid Flow Measurements," Experimental Thermal and Fluid Science, n. 3, pp. 52-59, 1990.
Pisano, A. P., "Resonant-Structure Micromotors: Historical Perspective and Analysis," Sensors and Actuators, v. 20, n. 1/2, pp. 83-89, Elsevier, 1989. (Special Edition for Micro Electromechanical Systems.)
Lin, Y. and A. P. Pisano, "The Differential Geometry of the General Helix as Applied to Mechanical Compression Springs," Trans. ASME, J. of Appl. Mech., v. 55, n. 4, pp. 831-836, 1988.
Wu, L. and A. P. Pisano, "Development and Application of Iconic and Inactive-Joint Concepts to Automated Mechanical System Sketching," Trans. ASME, J. Mech., Trans, Auto Des, v. 110, pp. 73-80, 1988.
Chan, C.-Y. and A. P. Pisano, "Dynamic Model of a Fluctuating Rocker-Arm Ratio Cam System," Trans. ASME, J. Mech., Trans, Auto Des, v. 109, n. 3, pp. 356-365, Sep 1987.
Lin, Y. and A. P. Pisano, "General Dynamic Equations of Helical Springs with Static Solution and Experimental Verification," Trans. ASME, J. of Appl. Mech., v. 54, n. 4, pp. 910-917, 1987.
Pisano, A. P. and H.-T. Chen, "Coulomb Friction and Optimal Rocker Arm Ratio for High-Speed Cam Systems," Trans. ASME, J. Mech., Trans., Auto. Des., v. 108, n. 3, pp. 340-344, 1986.
Pisano, A. P., "Coulomb Friction in High-Speed Cam Systems," Trans. ASME, J. Mech., Trans, Auto Des, v. 106, n. 4, pp. 470-474, 1984.
Pisano, A. P. and F. Freudenstein, "An Experimental and Analytical Investigation of the Dynamic Response of a High-Speed Cam-Follower System - Part 1: Experimental Investigation," Trans. ASME, J. Mech., Trans, Auto Des, v. 105, n. 4, pp. 692-698, 1983.
Pisano, A. P. and F. Freudenstein, "An Experimental and Analytical Investigation of the Dynamic Response of a High-Speed Cam-Follower System - Part 2: A Combined, Lumped/- Distributed Parameter Dynamic Model," Trans. ASME, J. Mech., Trans, Auto Des, v. 105, n. 4, pp. 699-704, 1983.
Lebouitz, K. S., A. Mazaheri, R. T. Howe and A. P. Pisano, “Vacuum Encapsulation of Resonant Devices Using Permeable Polysilicon,” Proc. IEEE Micro Electro Mechanical Systems Workshop, pp. 470-475, Orlando, FL, 1999. (IEEE Catalog Number 99CH36291).
Horsley, D. A., N. Wongkomet, R. Horowitz and A. P. Pisano, "Precision Positioning Using a Microfabricated Electrostatic Actuator,” IEEE Trans. Magnetics, v. 35, n.2, pp. 993-999, Mar 1999.
Maharbis, M. M., M. B. Cohn, R. T. Howe, R. Horowitz and A. P. Pisano, “Batch Micropackaging by Compression-Bonded Wafer-Wafer Transfer,” Proc. IEEE Micro Electro Mechanical Systems Workshop, pp. 482-489, Orlando, FL, 1999. (IEEE Catalog Number 99CH36291).
Bohringer, K. F., K. Goldberg, M. Cohn, R. T. Howe and A. P. Pisano, “Parallel Microassembly with Electrostatic Force Fields,” Proc. IEEE Int. Conf. Robotics and Automation, pp. 1204-1211, v. 2, May 1998. (IEEE order number 98CH36146).
Davis, W. O. and Pisano, A. P., "On the Vibrations of a MEMS Gyroscope," International Conference on Modeling and Simulation of MEMS, pp. 557-562, 1998, Santa Clara, CA, Apr 1998.
Horsley, D. A., D. Hernandez, R. Horowitz, A. K. Packard and A. P. Pisano, "Closed-Loop Control of a Microfabricated Electrostatic Actuator for Dual-Stage Hard Disk Drive Servo Systems", Proc. Am. Cntl. Conf., v. 5, pp. 3028-3032, Philadelphia, PA, Jun 1998. (IEEE order number 98CH36207).
Horsley, D. A., N. Wongkomet, R. Horowitz and A. P. Pisano, "Design and Feedback Control of Electrostatic Actuators for Magnetic Disk Drives," Transducers Research Foundation Workshop on Solid-State Sensors and Actuators, Hilton Head, SC, pp. 120-123, Jun 1998. (Transducers Research Foundation order number 98TRF-0001).
Roessig, T. A., R. T. Howe and A. P. Pisano, “Surface-Micromachined 1MHz Oscillator with Low-Noise Pierce Configuration,” Transducers Research Foundation Workshop on Solid-State Sensors and Actuators, Hilton Head, SC, pp. 328-332, Jun 1998. (Transducers Research Foundation order number 98TRF-0001).
Lebouitz, K. S. and A. P. Pisano, “Microneedles and Microlancets Fabricated Using SOI Wafers and Isotropic Etching,” Proc. Sym. Microstructures and Microfabricated Sys. IV, pp. 235-244, Electrochem. Soc., 1998.
Lebouitz, K. S. and A. P. Pisano, “Silicon Nitride Tubes for Fluid Flow and Bubble Growth Visualization,” Proc. Sym. Microstructures and Microfabricated Sys. IV, pp. 77-86, Electrochem. Soc., 1998.
Aggarwal, S. K., D. A. Horsley, R. Horowitz and A. P. Pisano, "Micro-actuators for High Density Disk Drives," Proc. Am. Cont. Conf., pp. 3979-3084, 1997.
Hipwell, R. L., R. S. Muller and A. P. Pisano, “Characterization of Thin-Film Impact Microactuators,” Proc. ASME, DSC-62, pp. 87-91, ASME Int. Cong. & Expo., Nov 1997.
Juneau, T. N. and A. P. Pisano, “Dual Axis Operation of a Micromachined Rate Gyroscope,” Transducers '97, Chicago, IL, pp. 883-886, Jun 1997.
Cohn, M. B., Y. Liang, R. T. Howe and A. P. Pisano, “Wafer-to-Wafer Transfer of Microstructures for Vacuum Packaging,” Technical Digest. Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, USA, 3-6 Jun 1996.) Cleveland Heights, OH, USA: Transducer Res. Found, pp. 32-35, 1996.
Evans, J., D. Liepmann and A. P. Pisano, "Planar Laminar Mixer," IEEE Proc., Micro Electro Mechanical Systems Workshop, pp. 96-101, Nagoya, Japan, 1997. (IEEE Catalog Number 97CH36021).
Horsley, D. A., A. Singh, A. P. Pisano and R Horowitz, "Angular Micropositioner for Disk Drives," IEEE Proc., Micro Electro Mechanical Systems Workshop, pp. 454-459, Nagoya, Japan, 1997. (IEEE Catalog Number 97CH36021).
Roessig, T. A., R. T. Howe and A. P. Pisano, “Nonlinear Mixing in Surface Micromachined Tuning Fork Oscillators,” Proc. IEEE Int. Freq. Cont. Symp., pp. 778-782, Orlando, FL. (IEEE Catalog Number 97CH36016).
Juneau,
T. N. and A. P. Pisano, “Micromachined Dual Input Axis
Angular Rate Sensor,” IEEE Solid State Sensor and Actuator Workshop, Hilton
Head, SC, pp. 299-302, Jun 1996.
Ljung, P. B. and A. P. Pisano, "Nonlinear Dynamics of Micromachined Rate Gyros," Proc. ASME, DSC-v. 59, pp. 393-400, ASME International Congress and Exposition, Nov 1996, Atlanta. (Library of Congress 96-78683).
S.-H. Wang and A. P. Pisano, “Stepper Motor Driven Four-Bar: Dynamic Modeling and Synthesis,” Proc. ASME Design Engineering Technical Conference, pp. 1-15, Aug 1996, Irvine, California.
Brosnihan, T. J., A. P. Pisano and R. T. Howe, "Surface Micromachined Angular Accelerometer with Force Feedback," Proc. ASME, DSC-v. 57-2, pp. 941-947, ASME International Congress and Exposition, Nov 1995, San Francisco. (Library of Congress 95-81252).
Cohn, M. B., R. T. Howe and A. P. Pisano, "Self-Assembly of Microsystems Using Non-Contact Electrostatic Traps," Proc. ASME, DSC-v. 57-2, pp. 893-900, ASME International Congress and Exposition, Nov 1995, San Francisco. (Library of Congress 95-81252).
Ljung, P. B., T. N. Juneau and A. P. Pisano, "Micromachined Two Input Axis Angular Rate Sensor," Proc. ASME, DSC-v. 57-2, pp. 957-962, ASME International Congress and Exposition, Nov 1995, San Francisco. (Library of Congress 95-81252).
Roessig, T. A., A. P. Pisano and R. T. Howe, "Surface-Micromachined Resonant Force Sensor," Proc. ASME, DSC-v. 57-2, pp. 871-876, ASME International Congress and Exposition, Nov 1995, San Francisco. (Library of Congress 95-81252).
Daneman, M. J., N. C. Tien, O. Solgaard, A. P. Pisano, K. Y. Lau and R. S. Muller, "Linear Micro Vibromotor for Positioning Optical Components," IEEE Proc., Micro Electro Mechanical Systems Workshop, pp. 55-60, Amsterdam, The Netherlands, 1995. (IEEE Catalog Number 95CH35754).
Lebouitz, K. S., R. T. Howe and A. P. Pisano, "Permeable Polysilicon Etch-Access Windows for Microshell Fabrication," Proc. Transducers'95, pp. 224-227, Stockholm, Sweden, Jun 1995. (ISBN-91-630-3473-5).
Mirfendereski, D., L. Lin, A. Der Kiureghian and A. P. Pisano, "Probabilistic Response of Micro-Fabricated Polysilicon Beam Structures: Comparison of Analysis and Experiments," Proc. ASME, DSC-v. 46, pp. 77-80, ASME Winter Annual Meeting, Nov 1993.
Cho, Y.-H., B.-M. Kwak, A. P. Pisano and R. T. Howe, "Viscous Energy Dissipation in Laterally Oscillating Planar Microstructures: A Theoretical and Experimental Study," IEEE Proc., Microelectromechanical Systems Workshop, pp. 93-98, Fort Lauderdale, Florida, 1993. (IEEE Catalog Number 93CH3265-6).
Lin, L., R. T. Howe and A. P. Pisano, "A Passive, In-Situ Micro Strain Gauge," IEEE Proc., Microelectromechanical Systems Workshop, pp. 201-206, Fort Lauderdale, Florida, 1993. (IEEE Catalog Number 93CH3265-6).
Lee, A. P., D. J. Nikkel, Jr. and A. P. Pisano, "Polysilicon Linear Micro Vibromotors," Proc. Transducers'93, pp. 46-49, Yokohama, Japan, Jun 1993.
Lin, L., A. P. Pisano and R. S. Muller, "Silicon Processed Microneedles," Proc. Transducers'93, pp. 237-240, Yokohama, Japan, Jun 1993.
Lin, L., K. M. McNair, R. T. Howe and A. P. Pisano, "Vacuum-Encapsulated Lateral Microresonators," Proc. Transducers'93, pp. 270-273, Yokohama, Japan, Jun 1993.
Lee, A. P., P. B. Ljung and A. P. Pisano, "Polysilicon Micro Vibro Motors," IEEE Proc., Micro Electro Mechanical Systems Workshop, pp. 177-182, Travemunde, Germany, 1992. (IEEE Catalog Number 92CH3093-2).
Lee, A. P., A. P. Pisano and M. G. Lim, "Impact, Friction and Wear Testing of Microsamples of Polycrystalline Silicon," Mat Res. Soc. Symp. Proc., v. 276, pp. 67-78, 1992.
Lin, L., C. T.-C. Nguyen, R. T. Howe and A. P. Pisano, "Microlectromechanical Filters for Signal Processing," IEEE Proc., Micro Electro Mechanical Systems Workshop, pp. 226-231, Travemunde, Germany, 1992. (IEEE Catalog Number 92CH3093-2).
Cohn, M. B., C.-J. Kim and A. P. Pisano, "Self-Assembling Electrical Networks: An Application of Micromachining Technology," Proc. Transducers'91, San Francisco, Jun 1991.
Field, L. A., R. M. White and A. P. Pisano, "Fluid-Powered Rotary Gears and Micro-Flow Channels," Proc. Transducers'91, San Francisco, Jun 1991.
Judy, M. W., Y.-H. Cho, R. T. Howe and A. P. Pisano, "Self-Adjusting Microstructures (SAMS)," IEEE Proc., Microelectromechanical Systems Workshop, pp. 51-56, Nara, JAPAN, 1991. (IEEE Catalog Number 91CH2957-9).
Kim, C.-J., A. P. Pisano and R. S. Muller, "Overhung Polysilicon Microgripper," Proc. Transducers'91, San Francisco, Jun 1991.
Lee, A. P., A. P. Pisano and L. Lin, "Normal and Tangential Impact in Micro Electromechanical Structures," IEEE Proc., Microelectromechanical Systems Workshop, pp. 21-26, Nara, JAPAN, 1991. (IEEE
Catalog Number 91CH2957-9).
Lin, L., A. P. Pisano and A. P. Lee, "Microbubble Powered Actuator," Proc. Transducers'91, San Francisco, Jun 1991.
Brennen, R. A., A. P. Pisano and W. C. Tang, "Multiple Mode Micromechanical Resonators," IEEE Proc., Microelectromechanical Systems Workshop, pp. 9-14, Napa Valley, 1990. (IEEE Catalog Number 90CH2832-4).
Brennen, R. A., M. G. Lim, A. P. Pisano and A. T. Chou, "Large Displacement Linear Actuator," IEEE Solid State Sensor and Actuator Workshop, Hilton Head, 1990.
Cho, Y.-H. and A. P. Pisano, "Optimum Structural Design of Micromechanical Crab-Leg Flexures with Microfabrication Constraints," Proc. ASME, DSC-v. 19, Microstructures, Sensors and Actuators, pp. 31-50, ASME Winter Annual Meeting, Nov 1990.
Kim, C.-J., A. P. Pisano, R. S. Muller and M. G. Lim, "Polysilicon Microgripper," IEEE Solid State Sensor and Actuator Workshop, Hilton Head, 1990.
Kim, C.-J. and A. P. Pisano, "Design, Testing and Fabrication of a Polysilicon Microgripper," Proc. ASME, DSC-v. 19, Microstructures, Sensors and Actuators, pp. 99-110, ASME Winter Annual Meeting, Nov 1990.
Lee, A. P. and A. P. Pisano, "Repetitive Micro Impact Test Structure," IEEE Solid State Sensor and Actuator Workshop, Hilton Head, 1990.
Lee, A. P. and A. P. Pisano, "Repetitive Impact Testing of Micro Mechanical Structures," Proc. ASME, DSC-v. 19, Microstructures, Sensors and Actuators, pp. 51-68, ASME Winter Annual Meeting, Nov 1990.
Hatch, C. T. and A. P. Pisano, "Modeling, Simulation and Modal Analysis of a Hydraulic Valve Lifter with Oil Compressibility Effects," Proc. ASME, DE-v. 19-3, Advances in Design Automation - 1989, pp. 271-280, Montreal, 1989. (ASME Order Number H0509C).
Hipwell, R. L., A. P. Pisano, R. S. Muller, "Characterization of Thin-Film Impact Microactuators," ASME 1997 International Mechanical Engineering Congress and Exposition, Dallas, TX, Nov 16-21, pp. 87-91, 1997.
Lin, Y. and A. P. Pisano, "Three-Dimensional Dynamic Simulation of Helical Compression Springs," Proc. ASME, DE-v. 19-3, Advances in Design Automation - 1989, pp. 101-108, Montreal, 1989. (ASME Order Number H0509C).
Talbot, N. and A. P. Pisano, “Polymolding: Two Wafer Polysilicon Micromolding of Closed Flow Passages for Microneedles and Microfluidic Devices,” pp. 265-268, Transducers Research Foundation Workshop on Solid State Sensor and Actuators, Hilton Head, SC, 1998. (Transducers Research Foundation Catalog Number 98TRF-0001).
Pisano, A. P., "Resonant-Structure Micromotors," IEEE Proc., Micro Electro Mechanical Systems Workshop, pp. 44-48, Salt Lake City, Utah, 1989. (IEEE Catalog Number 89THO249-3).
Pisano, A. P. and Y.-H. Cho, "Mechanical Design Issues in Laterally-Driven Microstructures," Proc. Transducers'89, Montreux, Switzerland, 1989.
Pisano, A. P., R. T. Howe, B. E. Boser, R. M. White and R. S. Muller, "Micro Vibratory Rate Gyroscope," California PATH Report to CalTrans, 95-C3 (MOU 41), Mar 1995.
Allen, J. J., R. D. Kinney, J. Sarsfield, M. R. Daily, J. R. Ellis, J. H. Smith, S. Montague, R. T. Howe, B. E. Boser, R. Horowitz, A. P. Pisano, Lemkin, M. A., Clark, W. A. and Juneau, T., “Integrated Micro-Electro-Mechanical Sensor Development for Inertial Applications,” IEEE Aerospace and Electronic Systems Magazine, pp. 36-40, v. 13, n. 11, Nov 1998.
Pisano, A. P., "Electrostatic Micromotors," International Symposium on the Application of Electromagnetic Forces, Sendai, Japan, 28-30 Jan 1991. (Invited Lecture).
Pisano, A. P., "Electrostatic Microgrippers," IEEE Forum on Control in Micro Electromechanical Systems, Nagoya, Japan, 29 Jan 1991 (Invited Lecture).
Pisano, A. P., "Electrostatic Design of Micromotors," Proc. Transducers'91, San Francisco, Jun 1991. (Invited Lecture).
Pisano, A. P. and Y.-H. Cho, "Comparison of Laterally-Driven Microflexure Suspension Systems," Proc. JIEE Micromechatronics Workshop, University of Tokyo, Tokyo, 1989.
Chan, C.-Y. and A. P. Pisano, Optimal Valve Lift Curve Design for Valve Train Cam Systems, 1987. (Presented at the ASME Design Automation Conference, Boston, 1987).
Pisano, A. P., "Cam Systems with Coulomb Friction: Comparison of Two Models and Experiment," ASME Paper 86-DET-96. (Presented at ASME 1986 Design Automation Conference, Columbus, Ohio, 1986).
"Micromechanical Systems 1993," Proc. of the 1993 Symposium on Micro Mechanical Systems, ASME WAM, Nov 1993, DSC-v. 46. (With J. Jara-Almonte and W. Trimmer).
"Microstructures, Sensors and Actuators," Proc. of the 1992 Symposium on Micro Mechanical Systems, ASME WAM, Nov 1992, DSC-v. 40. (With D. Cho, J. P. Peterson and C. Friedrich).
"Microstructures, Sensors and Actuators," Proc. of the 1991 Symposium on Micro Mechanical Systems, ASME WAM, Dec 1991, DSC-v. 32. (With D. Cho, R. Warrington, Jr., H. Bau, C. Friedrich, J. Jara-Almonte and J. Liburdy).
"Microstructures, Sensors and Actuators," Proc. of the 1990 Symposium on Micro Mechanical Systems, ASME WAM, Nov 1990, DSC-v. 19. (With D. Cho, R. Warrington, Jr., C. Blechinger, W. Trimmer and L. Trefethan).
"Mechanism Synthesis and Analysis," Proc. of the 1990 ASME Design Technical Conferences - 21st Biennial Mechanisms Conference, DE-v. 25, Chicago, Sep 1990. (With S. Derby and M. McCarthy). (ASME Order Number H00624).
"Cams, Gears, Robot and Mechanism Design," Proc. of the 1990 ASME Design Technical Conferences - 21st Biennial Mechanisms Conference, DE-v. 26, Chicago, Sep 1990. (With S. Derby and M. McCarthy). (ASME Order Number H00625).
"Flexible Mechanism, Dynamics and Robot Trajectories," Proc. of the 1990 ASME Design Technical Conferences - 21st Biennial Mechanisms Conference, DE-v. 24, Chicago, Sep 1990. (With S. Derby and M. McCarthy). (ASME Order Number H00623).
Degrees Awarded
Ansari, M., "Optimal Design of Flexure Pivots," Master's Project, Univ. of Calif., Berkeley, May 1986.
Askenazi, A., "Dynamics of Single-Track Vehicles," Master's Project, Univ. of Calif., Berkeley, May 1994.
Berry, S., "Kinematic Optimization of a Continuously-Variable Transmission," Master's Project, Univ. of Calif., Berkeley, May 1985.
Brennen, R. A., "Design and Numerical Simulation of a Self-Integrating Accelerometer," Master's Project, Univ. of Calif., Berkeley, May 1989.
Briscoe, K. L., "Experimental Determination of Dynamic Friction Coefficient in a Tappet/Finger-Follower Valve Train System," Master's Project, Univ. of Calif., Berkeley, Dec 1989.
Brosnihan, T., "Surface Micromachined Angular Accelerometers with Force Feedback," Master's Project, Univ. of Calif., Berkeley, Dec 1995.
Chan, C.-Y., "A Lumped-Parameter Dynamic Model for Finger-Follower Cam Systems," Master's Project, Univ. of Calif., Berkeley, May 1985.
Chen, H.-T., "Optimal Design of Rocker Arm Ratio in High-Speed Cam-Follower Systems," Master's Project, Univ. of Calif., Berkeley, May 1984.
Chua, C., "Test Method to Characterize Properties of Polycrystalline Silicon," Master's Project, Univ. of Calif., Berkeley, May 1987.
Dieron, R., "HexSil Micro Disk Drive Arm," Master's Project, Univ. of Calif., Berkeley, May 1996.
Eliot, M., "Design of a Multi-Adjustment Four-Bar Mechanism," Master's Project, Univ. of Calif., Berkeley, May 1988.
Fox, R. P., "The Motion of a Pointer Tip Driven by Two Linked Electrostatic Comb Drives," Master's Project, Univ. of Calif., Berkeley, May 1991.
Glorioso, J. R, "Experimental Verification of a Hydraulic Valve Lifter Model," Master's Project, Univ. of Calif., Berkeley, May 1993.
Hatch, C. T., "Modeling, Simulation and Modal Analysis of a Hydraulic Valve Lifter with Oil Compressibility Effects," Master's Project, Univ. of Calif., Berkeley, May 1989.
Heilmann, M. R., "The Design and Development of an Injection Molded Structural Rib for Intrachochlear Implants," Master's Project, Univ. of Calif., Berkeley, May 1995.
Hipwell, R. L., "Parametric Design and Characterization of Linear Microvibromotors," Masters's Project, Univ. of Calif., Berkeley, Oct 1997.
Hodges, P. H., "Modeling Coulomb Friction in Valve Springs," Master's Project, Univ. of Calif., Berkeley, Dec 1984.
Hsu, W.-S., "Simulation of an Oscillating Automotive Finger-Follower Valve Train," Master's Project, Univ. of Calif., Berkeley, Dec 1989.
Johnson, D., "Optimal. Linkage Synthesis," Master's Project, Univ. of Calif., Berkeley, May 1985.
Kaplinsky, G., "Coulomb Damping in High-Speed Cam Systems," Master's Project, Univ. of Calif., Berkeley, May 1984.
Kingham, P. H., "Experimental Determination of Valve Bounce in an Overhead Cam Automobile Engine," Master's Project, Univ. of Calif., Berkeley, May 1991.
Lebouitz, K. S., "Permeable Polysilicon Etch-Access Windows for Microshell Fabrication," Masters's Project, Univ. of Calif., Berkeley, May 1996.
Lee, A. P., "Coulomb Friction in Integrated Micro-Mechanical Structures -- A Preliminary Test Method," Master's Project, Univ. of Calif., Berkeley, May 1989.
Lee, M. H., "Experimental Measurement of Oil Compressibility Effects in a Hydraulic Lifter," Master's Project, Univ. of Calif., Berkeley, Apr 1990.
Lin, L., "The Design, Fabrication, Modeling and Testing of a Microbubble Powered Actuator," Master's Project, Univ. of Calif., Berkeley, May 1991.
McCarthy, P., "Design of a Micromechanical Fatigue Testing Machine," Master's Project, Univ. of Calif., Berkeley, May 1995.
Mizoguchi, H., "Rolling Band Microsuspension," Master's Project, Univ. of Calif., Berkeley, May 1991.
Nielsen, M., "Finite Element Methods for Predicting Gear Tooth Bending Strength," Master's Project, Univ. of Calif., Berkeley, May 1987.
Pearce, W., "Design and Manufacture of a Gear-Testing Machine," Master's Project, Univ. of Calif., Berkeley, May 1987.
Richardson, J., "Parallel Computation of Planar Mechanism Dynamics," Master's Project, Univ. of Calif., Berkeley, Dec 1986.
Roessig, T. A., "Surface-Micromachined Resonant Force Transducers," Master's Project, Univ. of Calif., Berkeley, Dec 1995.
Sefler, J. F, "The Design, Experimentation and Simulation of a Novel Coulomb Friction Device for Automotive Valve Spring Damping," Master's Project, Univ. of Calif., Berkeley, Dec 1991.
Sengupta, S., "Interactive Package for Serial Communications Initiation between the Soltec Memory Recorder and the MicroVAX Computer," Master's Project, Univ. of Calif., Berkeley, Jan 1988.
Sherman, D., "An Investigation of MEMS Anchor Design for Optimal Stiffness and Damping," Master's Project, Univ. of Calif., Berkeley, May 1996.
Steinberg, M., "Characterization of Polycrystalline Silicon as an Engineering Material," Master's Project, Univ. of Calif., Berkeley, May 1986.
Troutman, W. F. Jr., "An Investigation of Current and Potential Sensors for In-Line, Real Time Engine Wear and Lubricant Condition Monitoring," Master's Project, Univ. of Calif., Berkeley, Dec 1991.
Wang, S.-H., "Stepper Motor Driven Four Bar: Dynamic Modeling and Synthesis," Master's Project, Univ. of Calif., Berkeley, May 1993.
Wu, L., "Automated Mechanical System Sketching," Master's Project, Univ. of Calif., Berkeley, Dec 1986.
Yang, K, "Mechanical Design of HexSil Disk Drive Components," Master’s Project, Univ. of Calif., Berkeley, May 1996.
Yee, P., "Algorithm for the Automatic Generation of Unlabeled Graphs via Boolean Operators and Subcircuits," Master's Project, Univ. of Calif., Berkeley, May 1988.
Zito, D., "Experimental Verification of a Model of a Hydraulic Valve Lifter with Orifice Flow Effects," Master's Project, Univ. of Calif., Berkeley, May 1991.
Brennen, R. A., "Large Displacement Micromotors," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Dec 1993.
Brosnihan, T., “A Fabrication Process for Fully Integrated, High-Aspect-Ratio, SOI-Based, Microelectromechanical Systems,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1998.
Chan, C.-Y., "Optimal Synthesis of Finger-Follower, Automobile Cam Systems," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1988.
Cho, Y.-H., "Design, Fabrication and Optimization of Micromechanical Flexures," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1990.
Cohn, M, "Assembly Techniques for Microelectromechanical Systems," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1998.
Davis, W. O., “Mechanical Analysis and Design of Vibratory Micromachined Gyroscopes,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Jan 2001.
DeVoe, D., "Piezoelectric Microaccelerometers," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Dec 1997.
Evans, J., “Planar Microfluidics: Toward Large Scale Integration of Channels, Pumps, Valves and Fluid Mixers in Microelectromechanical Systems (MEMS),” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1999.
Hodges, P H, "On the Synthesis of Straight Line, Constant Velocity Scanning Mechanisms," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Dec 1991.
Horsley, D. A., "A Microfabricated Electrostatic Actuator for Magnetic Hard Disk Drives,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Dec 1998.
Hsu, W., "Experimental and Analytical Investigation of Finger-Follower Cam Systems," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1992.
Juneau, T. N., " Micromachined Dual-Axis Rate Gyroscope,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Dec 1997.
Kim, C.-J., "Silicon Electromechanical Microgrippers: Design, Fabrication and Testing," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Dec 1991.
Lebouitz, K., "Micro Encapsulation Shell Technology."
Lee, A. P., "Impact Actuation of Polysilicon Micromechanical Structures," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1992.
Lemkin, M., " Micro Accelerometer Design with Digital Feedback Control,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1998.
Lin, L., "Micromechanical Encapsulated Structures," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Dec 1993.
Lin, Y., "Three Dimensional Dynamic of Valve Springs for Automotive Valve Trains," Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1989.
Ljung, P. B., “MEMS Gyroscopes,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Dec 1996.
Muller, L., “Gimballed Electrostatic Microactuators with Embedded Interconnects,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Jan 2000.
Papavasiliou, A. P., “Bubble-Actuated Planar Microvalves,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 2001.
Roessig, T. A., “Integrated MEMS Tuning Fork Oscillators for Sensor Applications,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1998.
Stupar, P. A., “Micro-Fabricated Shells for Mechanical and Fluidic Interconnects,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, Jan 2001.
Talbot, N., "Polysilicon Micromolding of Closed Flow Passages for the Fabrication of Multifunctional Microneedles,” Ph. D. Thesis, Univ. of Calif., Berkeley, CA, May 1999.